Gratulacje, nie mamy więcej pytań

espresso-napoje-roślinne-decaf

Poniżej znajdziesz produkty, które do Ciebie pasują. Życzymy wszystkiego specialty i klasycznie miłego dnia!

73 - 108 of 178 available products
73 - 108 of 178 available products
Bialetti - Deka - 16 Capsules

Manufacturer: BIALETTI

Real Italian coffee in capsules. Bialetti Deka is decaffeinated Italian medium roast coffee, with the cereal flavour and velvety body. Medium roast, compatible with Bialetti system capsule coffee machines.Roast level: MediumFlavour: CerealBody: Velvety
Rhino Coffee Gear - Square Knock Chute
Rhino Coffee Gear commercial knock chute. Features:- In- bench chute - takes up less bench space and keeps the floor clear.- Made of high-quality 304 grade stainless steel, with a rubber gasket and sleeve.- The knock bar is welded and covered with a replacable rubber band.Dimensions: - Rubber gasket: 16.8 cm x 18 cm (width x depth)- Chute: 14 cm x 15 cm x 11 cm (width x depth x height).
Barista Space - C1 Distribution Tool Black 58mm

Manufacturer: BARISTA SPACE

A tool that will make the work of every barista more efficient. The convex base distributes the grinds in the portafilter evenly before tamping. This results in proper extraction, prevents channelling and makes your espresso shots more repeatable.How it worksAfter pouring ground coffee into the portafilter basket, put the levelling tool on it. Twist the levelling tool 2-4 times without pushing it down. The profiled base distributes the grounds. After that, tamp the coffee with a regular tamper.How it's builtSolid, made of high-quality stainless steel and plastic. The knob is decorated with a carbon look pattern. The height of the base can be adjusted between 7 and 13 mm for different baskets.58 mm diameter.
Barista Space - C3 Needle Tamper Black 58mm

Manufacturer: BARISTA SPACE

Barista Space 58mm needle tamper is a tool that will make the work of every barista more efficient. The needle base breaks the clumps in the portafilter evenly before tamping. This results in proper extraction, prevents channelling and makes your espresso shots more repeatable.After pouring ground coffee into the portafilter basket, put the needle tamper tool on it. Twist it2-4 times without pushing it down. After that, tamp the coffee with a regular tamper.58 mm diameter.
Motta Europa Milk Pitcher - 250 ml

Manufacturer: MOTTA

A professional mil pitcher made by Metallurgica Motta.Its unique shape, ergonomics and high quality make it a perfect milk jug recommended by the best baristas in the world. Made of top-quality 18/10 304 highly polished stainless steel.Capacity: 250 ml
Motta Milk Pitcher - White - 500ml

Manufacturer: MOTTA

A professional pot for milk frothing made by Metallurgica Motta.Its unique shape, ergonomics and high quality make it the favourite pot for milk frothing recommended by the best baristas in the world. Made of top-quality 18/10 highly polished stainless steel.Capacity: 500 mlColour: white
Rocket Bean - Brazylia Limitless Decaf Espresso 1 kg

Manufacturer: ROCKET BEAN

Roasting date: 01.06.2026

Whole-bean specialty coffee from Brazil, roasted by Rocket Bean in Latvia. Dark roast, perfect for espresso machines and moka pots. You can expect the flavour resembling dark chocolate, caramel and chicory.Origin: BrazilFarm: Regional smallholders of Santos regionRegion: SantosMethod of decaffeination: Methylene Chloride Variety: Bourbon, CatuaiAltitude: 900-1100 m a. s. l.Cuping score: 81 / 100 pktABOUT THE COFFEEWith our Brazilian Decaf espresso, your pleasure from coffee becomes Limitless!Limitless espresso is an excellent choice for those who prefer to have coffee in the evening or restrict caffeine intake at specific hours of the day. Round body, classic chocolaty base profile with sweet caramel and dried fruit sweetness – together with milk, it turns into dessert in your coffee cup.Store in a cold and dry space.
Motta - Coffee Tamping Set With Three Positions

Manufacturer: MOTTA

Motta stand for portfilter, tamper, and levelling tool. Made of elegant wood, it allows for safe and convenient storage of barista accessories. The portafilter is placed in the slot in the middle, the one on the right side holds a tamper up to a diameter of 58mm, and the one on the left holds a coffee levelling tool.
Espresso Gear - Edge Tamping Mat

Manufacturer: ESPRESSO GEAR

Silicone tamping mat by Espresso Gear! Solid and practical - perfectly protects portafilter and counter when tamping. Additional surface protects also the edge of  the counter. Essential accessory in every café!High edges of the mat help keeping everything in order - thanks to them coffee grains remain on the mat.140mm long x 200mm wide x 7 mm thick
Sage - Craft Tamper 54mm SEA202

Manufacturer: SAGE

Self-levelling tamper provides consistent pressure with minimal effort. Made from stainless steel and walnut, to provide an elegant touch to your espresso set up.Compatible with 54mm Sage portafilters.Consistent pressure every time you tampSpring-loaded mechanism provides consistent pressure between 7 kg and 10 kg. The variable force gauge has marking indicators to let you select your preferred tamp force to the grind.Levelling plateEnsures perfectly level tamping so the grind isn’t unevenly compacted on one side. This helps produce a more balanced shot.Engineered for precise pressureHigh quality 304 steel has been precisely engineered into a central shaft design. This allows the spring mechanism to load to an exact amount of pressure directly to the coffee grounds.Specification:Dimensions: 103 x 59 x 59 mmMaterial: Stal nierdzewna, drewno (orzech włoski)Weight: 0,3585 kg
Sage - Craft Distributor Duo 54mm SEA203

Manufacturer: SAGE

The 2-in-1 distribution tool helps break up clumps and evenly distribute the coffee grinds. Featuring three angled blades, it ensures a level top surface for consistent and precise tamping. Made from stainless steel and walnut, to provide an elegant touch to your espresso set up.Compatible with 54mm Sage portafilters.Adjustable distribution pins help break up clumpsThe distribution tool comes with 8 removable pins that can be set up angled or straight based on preference.Distribution face with three angled bladesDesigned to level distributed coffee grounds, the distribution face can turn in either direction for ease of use. By creating a uniform tamping base, it prevents channelling during extraction to produce a more balanced shot.Adjustable height for any size doseAdjust the height to match your desired depth of grind in relation to the shower screen, which may vary depending on the size of the filter basket.Specifications:Dimensions: 110 x 63 x 63 mmMaterial: Stal nierdzewna, drewno (orzech włoski)Weight: 0,37 kg
Espresso Gear - Pitcher Black 0.35l

Manufacturer: ESPRESSO GEAR

Teflon-coated stainless steel milk pitcher from Espresso Gear. The layer of durable teflon provides easy maintenance. Ergonomically designed spout and handle. The outer wall is branded with Espresso Gear logo.Capacity: 350ml
Rhino Coffee Gear Barista Milk Pitcher - pitcher blue 600 ml
Professional milk pitcher by Rhinowares.Capacity: 600 mlMade of 1 mm thick stainless steel, covered with double layer of a blue teflon pitcher is great for every café.The teflon coating reduces milk remains on the surface, which makes it easier to clean.Comfortable handle, elegant design, and practical pouring spout make it an ideal tool for every latte art lover. Perfectly balanced and solid.
Rhino Coffee Gear Stealth Milk Pitcher - pitcher black 950 ml
Professional milk pitcher by Rhinowares.Capacity: 950 mlMade of 1 mm thick stainless steel, covered with double layer of a black teflon pitcher is great for every café.The teflon coating reduces milk remains on the surface, which makes it easier to clean.Comfortable handle, elegant design, and practical pouring spout make it an ideal tool for every latte art lover.
Motta - Tamper Lightning Black 58mm

Manufacturer: MOTTA

A tool that will make the work of every barista more efficient. Motta Lightning tampr with 58 mm diameter. The base is made of stainless steel and the upper part of aluminium.
Motta Tamper Sfera 58 mm - Aluminium

Manufacturer: MOTTA

Tamper made of one piece of aluminium.Technical data:Diameter 58 mmFlat basis of the tamperMade of one piece of metalHeight: 100 mm
Espresso Gear - Pitcher Black 0.6l

Manufacturer: ESPRESSO GEAR

Teflon-coated stainless steel milk pitcher from Espresso Gear. The layer of durable teflon provides easy maintenance. Ergonomically designed spout and handle. The outer wall is branded with Espresso Gear logo.Capacity: 600ml
Last Chance
Rhino Coffee Gear - Silicone 600ml Milk Pitcher Handle Grip - Yellow
Silicone grip cover for 600ml Rhino Coffee Gear milk pitchers. Supports the grip, gives extra protection and helps the barista identify the pitcher with a particular type of milk.Colour: yellow.
Espresso Gear - Rosewood Tamper Flat 58mm

Manufacturer: ESPRESSO GEAR

Classic, professional tamper from Espresso Gear. A good tamper is one of the key elements to achieve a perfect espress - well-tamped coffee improves the water flow and adds consistency. Made of high-quality stainless steel and rosewood. This model has got a flat, 40% heavier base than a traditional one.Well-fitted, perfectly balanced, weighing 250 grams, with hollowed base - all that makes it a peerfect tool for professional use. Comes with a bag.Diameter: 58 mm.
Fellow Eddy Milk Pitcher - 350 ml Silver

Manufacturer: FELLOW

Fellow Eddy milk jug - an essential tool for every barista and latte art lover. Among its advantages, you can name a profiled spout, tapered body, and a convenient handle.Features:- Total capacity of 350 ml (12 oz).- Made of high-quality 304 18/8 stainless steel.- Measurement aid on the inner wall makes your work easier. The aid indicate 6, 8, 10 ounces (180, 240, 300 ml respectively).- Precise spout for detailed latte arts.- Sharp front crease goes almost all the way down the front face, which makes the flow rate more consistent when pouring milk.- Ribbon handle is open handed, which allows you to hold it any way you want.- Tapered body makes the milk spin more consistently.
Eureka - Easy Tamping Dynamometric Tamper 58mm

Manufacturer: EUREKA

Dynamometric tamper by Eureka. Designed for those who want to work efficiently and enjoy consistent tamping without spending a lot of time on it.Features:- CONSISTENT TAMPING OVER TIME: Thanks to the dynamometric system.- CHANNELING-FREE: Thanks to the border rest on the portafilter that allow to press perfectly perpendicular ensuring the best result without efforts and quickly.- ERGONOMIC AND EXTREMELY COMFORTABLE TO USE: Thanks to the handle specifically designed by Eureka R&D and partner baristas worldwide.-PREMIUM QUALITY AND FINISHES: Stainless steel base generated by precision mechanical processing to ensure premium aesthetics and dimensional quality as well as a reliable long-lasting product.- MATERIALS & DIMENSIONS: Metal and rubber tamping base, aluminum handle. Available in 58 mm.
Subminimal - Thermometer

Manufacturer: SUBMINIMAL

This tiny contactless digital thermometer is the perfect companion to the FlowTip Jug. Quickly monitor the temperature of your milk without having to place a probe in the milk means one less thing to clean.The device is opwered by two LR44 batteries (included).Good to know:Ensures IR thermometers measures the surface temperatures only, not the internal temperature of food or liquids or materials. Make sure you swirl or stir your milk before measuring for the most accurate reading.IR thermometers can be temporarily affected by frost, moisture, dust, fog, smoke or other particles in the air. Be aware that steam, even when a liquid is not boiling, can condense on the thermometer and affect the accuracy of the measurements.IR thermometers do not see through glass, liquids or other transparent surfaces, they measure the temperature of the first point of contact.IR thermometers have a beam and measure on a spot, make sure this is properly aimed at the surface to measure and not reflecting off other materials like the sides of jug or pot. Highly reflective surfaces like stainless steel tend to reflect ambient infrared energy rather than emit their own. So measuring boiling water in a highly polished stainless pot may give an incorrect reading.This thermometer cannot and should not be used for measuring body temperatures. Only a medical thermometer should be used for such purposes.
Motta Milk Pitcher - White - 350ml

Manufacturer: MOTTA

A professional pot for milk frothing made by Metallurgica Motta.Its unique shape, ergonomics and high quality make it the favourite pot for milk frothing recommended by the best baristas in the world. Made of top-quality 18/10 highly polished stainless steel. Capacity: 350 ml Colour: white
Motta Milk Pitcher - Black - 750ml

Manufacturer: MOTTA

A professional pot for milk frothing made by Metallurgica Motta.Its unique shape, ergonomics and high quality make it the favourite pot for milk frothing recommended by the best baristas in the world. Made of top-quality 18/10 highly polished stainless steel.Capacity: 750 mlColour: black
Eureka - Easy Adjustable Leveler 58,3mm Walnut

Manufacturer: EUREKA

58,3mm Eureka coffee leveling tool with walnut wood. Unique geometry studied by Eureka R&D to provide an even and leveled coffee distrubution.Key features:- UNIQUE ADJUSTMENT SYSTEM: For regulating the depth of the distributor.    Stepped to allow the user to clearly perceive changes through audible adjustments, ensuring complete stability of the set depth;    Equipped with a numerical scale for full control during the adjustment process;    Fully customizable to fit the size of the portafilter and the amount of ground coffee.- ERGONOMIC SHAPE AND ANTI-SLIP FINISHES:Designed to ensure proper leveling.- PREMIUM QUALITY MATERIALS:Stainless steel base generated by precision mechanical processing to ensure premium aestetics and dimensional quality as well as a solid long-lasting product, together with the refined design in walnut wood.
Eureka - Perfect Grip Tamper 58mm

Manufacturer: EUREKA

A perfect tamping experience to any type of palm and hand size.Features:- FIT EVERY BARISTA'S HAND: Designed to be user-adjustable and thus offer a perfect tamping experience to any type of palm and hand size.- EXTREMELY EASY TO REGULATE: In 4 different heights, thanks to the detachable rings.- ANTI-CHANNELING AID: Supporting the barista tamping technique, thanks to the solidity given by its considerable weight more than half kilo.- PREMIUM QUALITY AND FINISH: Stainless steel base generated by precision mechanical processing to ensure premium aesthetics and dimensional quality as well as a reliable long-lasting product.- RUBBER COATED TOP BASE: For a perfect grip during the tamping process and a soft and warm touch- MATERIALS & DIMENSIONS: Metal and rubber tamping base, aluminum handle.
Barista Space - 450 ml Ice Grain Golden Milk Jug

Manufacturer: BARISTA SPACE

Barista Space milk jug - an essential tool for every barista and latte art lover. Among its advantages, one can name a profiled spout, light weight, comfortable handle and teflon painting.Features:- 450 ml capacity.- Made of high-quality stainless steel 304.- Safe and elegant teflon painting.- Precise spout.- Lightweight (210g) and made of thin steel.- Comfortable handle allows you to pour from different angles.- Height: 10.1 cm; Bottom diameter: 8.2 cm.- Used and recommended by the Barista Champions of France, Australia, UK, Mexico, Greece, Switzerland, Brazil, Spain, Japan, and the 2018 World Barista Champion, Agnieszka Rojewska.
New
Heresy - Colombia Placebo Fine Decaf Espresso 252 g

Manufacturer: HERESY

Roasting date: 09.06.2026

Whole-bean specialty coffee from Colombia, roasted by Heresy. Dark roast, perfect for espresso, coffee machines, and moka pots. You can expect hints of caramel, chocolate, hazelnut and red fruits.Country: ColombiaRegion: TolimaFarm: Elias & Shady BayterProcessing: WashedMethod of decaffeination: SugarcaneAltitude: 1500 m a.s.l.Cupping score: 86 / 100ABOUT THE FARM AND THE COFFEE PRODUCEREl Vergel is a relatively young farm, as its very first harvest took place just 10 years ago. However, the Bayter family has rapidly transformed the plantation into one of the most advanced in the industry in terms of complex processing and cultivating a whole range of select, highly sought-after botanical varieties, such as Geisha, Pink Bourbon, Laurina, or Pacamara.Currently, El Vergel is conducting continuous research on bacteria and yeast to achieve even greater precision in controlling fermentation, and consequently, modulating flavor.In addition to coffee production, the Bayters are the force behind Forest, a company involved in both the export and import of green coffees, which means we were able to purchase this coffee directly, without any intermediaries.ABOUT THE COFFEE PROCESSING ON THE FARMThe Caturra variety, hand-picked, processed as washed, and decaffeinated using the sugarcane method with ethyl acetate, which reduces the caffeine content to approximately 0.1%.ROASTER'S OPINIONHonest truth – in a blind tasting, we would have trouble realizing this is a decaf. It tastes like top-tier, classic washed Colombias. Distinct, crisp fruit, but in espresso, it offers primarily high sweetness and plenty of chocolatey notes in the aftertaste. Top-notch!Store in a cool and dry place.
Fellow Eddy Milk Pitcher - 530 ml Silver

Manufacturer: FELLOW

Fellow Eddy milk jug - an essential tool for every barista and latte art lover. Among its advantages, you can name a profiled spout, tapered body, and a convenient handle.Features:- Total capacity of 530 ml (18 oz).- Made of high-quality 304 18/8 stainless steel.- Measurement aid on the inner wall makes your work easier. The aid indicate 8, 10 and 12 ounces (240, 300 and 350 ml respectively).- Precise spout for detailed latte arts.- Sharp front crease goes almost all the way down the front face, which makes the flow rate more consistent when pouring milk.- Ribbon handle is open handed, which allows you to hold it any way you want.- Tapered body makes the milk spin more consistently.
Motta Milk Pitcher - Red - 500ml

Manufacturer: MOTTA

A professional pot for milk frothing made by Metallurgica Motta.Its unique shape, ergonomics and high quality make it the favourite pot for milk frothing recommended by the best baristas in the world. Made of top-quality 18/10 highly polished stainless steel.Capacity: 500 mlColour: red
Rhino Coffee Gear - Thumpa - Knock Tube Black 300 mm
durable, and capacious knock tube by Rhinowares. Deals great with a lot of coffee remains.Bench Top Waste Tube - 300mm tall. Commercial grade benchtop knockout tube. Durability and stability were the main priorities in the design of this great coffee waste, well suited to domestic use. The Thumpa can literally take a thumping! Waste bins need to be able to withstand being hit, bashed and dropped without failing. Using high shock-resistant plastics, the Thumpa's durability tests had it come out the other side with unbelievably great results.The flared collar allows for excess splatters to be easily captured. The slotted bar inserts allow for easy removal of the rod and rubber set for cleaning and maintenance The top is removable for easy emptying OR for use in conjunction with a waste bag. Sits 300mm high off the countertop. The hole in the top allows you to clip a cloth to your thumpa for improved workflow and cleanliness.
Acaia Pearl Protective Film

Manufacturer: ACAIA

Protective film for Acaia Pearl scale.Features:- 0,11 mm thickness,- six films in a set,- easy to intall.Instruction:- Step 1: Clean the weighing platform.- Step 2: Peel back the label marked STEP 1.- Step 3: Align the film to the edge of the weighing platform. Then, while holding it in place, slowly apply the protective film.- Step 4: Carefully peel back the label marked STEP 2.
Motta Milk Pitcher - Green - 350ml

Manufacturer: MOTTA

A professional pot for milk frothing made by Metallurgica Motta.Its unique shape, ergonomics and high quality make it the favourite pot for milk frothing recommended by the best baristas in the world. Made of top-quality 18/10 highly polished stainless steel.Capacity: 350 mlColour: green
Bialetti - Milk Pitcher 750 ml - Silver

Manufacturer: BIALETTI

Barista Space milk jug - an essential tool for every barista and latte art lover.The Bialetti milk pitcher is a stainless steel saucepan, practical and resistant, ideal for heating milk both on the hob and using steam wand.The useful drip-catcher detail of this milk pitcher makes it perfect for pouring milk froth into cappuccino.SoecificationMaterial: stainless steelCapacity: 750 ml / 75 clNot suitable for use on induction plates.Lenght (mm): 160 Height (mm): 160 Width (mm): 105
12x Oatly - Oat Drink Barista 1L

Manufacturer: OATLY

Roasting date: 13.03.2027

Oatly is a variety of plant drinks that are a great alternative to dairy milk. They are rich in nutrients, vitamins and minerals. Oatly drinks are suitable for vegetarians and vegans. It's a great addition to the morning muesli and fruit cocktails.Oatly Barista is a product created for baristas and it is 100% plant-based. It foams easily, great for professional use.Ingredients: Oat base (water, oats 10 %), rapeseed oil, acidity regulator (dipotassium phosphate), calcium carbonate, calcium phosphates, iodised salt, vitamins (D2, riboflavin, B12).Nutritional values (100ml):Energy: 247 kJ/59 kcalFat: 3.0 g- including saturated fatty acids: 0.3 gCarbohydrates: 6.6 g- including sugars: 4.0 gFibre: 0.8 gProteins: 1.0 gSalt: 0.10 g
The Rinser - Flush Device Pitcher Rinser

Manufacturer: THE RINSER

Device used for rinsing glasses and milk jugs. An essential tool for each cafe, restaurant or bar.Made of stainless steel. The rinser works by pushing the plastic ring.Dimensions:- Width: 15 cm- Depth: 14 cm- Inner height: 6.35 cm

Sign up for the newsletter!

Sign up for the Coffeedesk newsletter to stay up to date on our latest news, promotions, and special offers.

For more information about data processing, please see our Privacy Policy.