Tampers
1
- 36 of 108 available products
Motta - Rubber Tamping Mat
Manufacturer: MOTTA
Rubber tamper base. Perfect for cafes and places which brew large quantity of coffee and need efficient and fast work.
To mount the base just put it on the edge of a countertop.
Motta Black Leveling Tool 58,5mm
Manufacturer: MOTTA
A tool that will make the work of every barista more efficient. The disc distributes the grinds in the portafilter evenly before tamping. This results in proper extraction, prevents channelling and makes your espresso shots more repeatable.
How it works
After pouring ground coffee into the portafilter basket, put the levelling tool on it. Twist the levelling tool 2-4 times without pushing it down. The profiled base distributes the grounds. After that, tamp the coffee with a regular tamper.
How it's built
Solid, made of high-quality stainless steel and plastic.
Diameter: 58,5 mm
Motta Black Leveling Tool 58mm
Manufacturer: MOTTA
A tool that will make the work of every barista more efficient. The disc distributes the grinds in the portafilter evenly before tamping. This results in proper extraction, prevents channelling and makes your espresso shots more repeatable.How it worksAfter pouring ground coffee into the portafilter basket, put the levelling tool on it. Twist the levelling tool 2-4 times without pushing it down. The profiled base distributes the grounds. After that, tamp the coffee with a regular tamper.How it's builtSolid, made of high-quality stainless steel and plastic. The knob is decorated with Motta logo and a cat picture.58 mm diameter.
Tamper Motta Brown - 51mm
Manufacturer: MOTTA
Tamper made of stainless steel 18.
Wooden handle.
Technical data:
Flat basis of the tamper
Ergonomic handle made of wood
Height: 100 mm
Motta tamper base
Manufacturer: MOTTA
Extremely practical base under a tamper with a flask holder.
Made of stainless steel, finished with non-slip rubber base.
Motta Tamper brown - 58 mm
Manufacturer: MOTTA
Tamper made of stainless steel 18.
Handle in brown.Technical data:
Flat basis of the tamper
Ergonomic handle made of wood
Height: 100 mm
Weight: 350 g
Motta Tamper brown - 53 mm
Manufacturer: MOTTA
Tamper made of stainless steel 18. Handle in brown.
Technical data:
Diameter 53 mm
Flat base of the tamper
Ergonomic handle made of wood
Height: 100 mm
Weight: 350 g
Barista Space - C3 Needle Tamper Black 58mm
Manufacturer: BARISTA SPACE
Barista Space 58mm needle tamper is a tool that will make the work of every barista more efficient. The needle base breaks the clumps in the portafilter evenly before tamping. This results in proper extraction, prevents channelling and makes your espresso shots more repeatable.After pouring ground coffee into the portafilter basket, put the needle tamper tool on it. Twist it2-4 times without pushing it down. After that, tamp the coffee with a regular tamper.58 mm diameter.
Motta - Rubber Tamper Base
Manufacturer: MOTTA
A stylish black rubber tamper base. Compatible with any size Motta tampers.
Barista Space - C1 Distribution Tool Black 58mm
Manufacturer: BARISTA SPACE
A tool that will make the work of every barista more efficient. The convex base distributes the grinds in the portafilter evenly before tamping. This results in proper extraction, prevents channelling and makes your espresso shots more repeatable.
How it works
After pouring ground coffee into the portafilter basket, put the levelling tool on it. Twist the levelling tool 2-4 times without pushing it down. The profiled base distributes the grounds. After that, tamp the coffee with a regular tamper.
How it's built
Solid, made of high-quality stainless steel and plastic. The knob is decorated with a carbon look pattern. The height of the base can be adjusted between 7 and 13 mm for different baskets.
58 mm diameter.
Motta Tamper Black - 53 mm
Manufacturer: MOTTA
Tamper made of stainless steel 18.
Handle in black.Technical data:
Flat basis of the tamper
Ergonomic handle made of wood
Height: 100 mm
Weight: 350 g
Diameter 53 mm
Espresso Gear - Luce Rosewood Tamper 57mm
Manufacturer: ESPRESSO GEAR
Classic tamper from Espresso Gear. Lighter, with thinner base than in a traditional version. Better price does not compromise the quality - the tamper is made of stainless steel and rosewood. A good tamper is one of the key elements to achieve a perfect espress - well-tamped coffee improves the water flow and adds consistency.Comes with a bag.Diameter: 57 mm.
Barista Space - C1 Distribution Tool Golden 58mm
Manufacturer: BARISTA SPACE
A tool that will make the work of every barista more efficient. The convex base distributes the grinds in the portafilter evenly before tamping. This results in proper extraction, prevents channelling and makes your espresso shots more repeatable.How it worksAfter pouring ground coffee into the portafilter basket, put the levelling tool on it. Twist the levelling tool 2-4 times without pushing it down. The profiled base distributes the grounds. After that, tamp the coffee with a regular tamper.How it's builtSolid, made of high-quality stainless steel and plastic. The knob is decorated with a carbon look pattern. The height of the base can be adjusted between 7 and 13 mm for different baskets.58 mm diameter.
Motta Tamper Black - 58 mm
Manufacturer: MOTTA
Tamper made of stainless steel 18. Handle in black.
Technical data:
Flat basis of the tamper
Ergonomic handle made of wood
Height: 100 mm
Weight: 350 g
Barista Space - C2 Coffee Tamper Black 58mm
Manufacturer: BARISTA SPACE
Tamper made by Barista Space. With its unique height adjusting system, you can get an even, repeatable shot of espresso every time. Improving espresso's quality and barista's performance, it is a perfect tool for every cafe.SettingThe tamper allows you to set the distance between the tamping base and the handle, depending on the dose of coffee you use. The side of the base is laser-marked. In order to change the setting, loosen the screw with the adjustment key, set as preferred, and lock the screw.How it's builtThe diameter of the base is 58mm. It is made from stainless steel and aluminum, it is adjustable. It also has anti-slip design on the knob.
Motta Tamper Bubinga
Manufacturer: MOTTA
It is made of stainless steel 18.Technical data:
Flat basis of the tamper
Ergonomic handle made of wood
Height: 100 mm
Weight: 350 g
Diameter: Ø 58 mm
Motta - Tamper Lightning Black 58,5mm
Manufacturer: MOTTA
A tool that will make the work of every barista more efficient. Motta Lightning tampr with 58.5 mm diameter. The base is made of stainless steel and the upper part of aluminium.
Motta Black Leveling Tool 57mm
Manufacturer: MOTTA
A tool that will make the work of every barista more efficient. The disc distributes the grinds in the portafilter evenly before tamping. This results in proper extraction, prevents channelling and makes your espresso shots more repeatable.
How it works
After pouring ground coffee into the portafilter basket, put the levelling tool on it. Twist the levelling tool 2-4 times without pushing it down. The profiled base distributes the grounds. After that, tamp the coffee with a regular tamper.
How it's built
Solid, made of high-quality stainless steel and plastic.
57 mm diameter.
Motta - Grinder Funnel 40mm
Manufacturer: MOTTA
Motta Grinder Funnel helps to dose coffee grounds directly into the portafilter. Avoid the mess and don't waste your coffee!
40mm height, compatible with filter holders up to 58mm (E61).
Made in Italy.
Motta wooden tamper base
Manufacturer: MOTTA
A stylish wooden tamper base. Compatible with any size Motta tampers.
Motta Tamper brown - 49 mm
Manufacturer: MOTTA
Tamper made of stainless steel 18.
Handle in brown.Technical data:
Diameter 49 mm
Flat basis of the tamper
Ergonomic handle made of wood
Height: 100 mm
Weight: 350 g
Motta Tamper Black - 57 mm
Manufacturer: MOTTA
Tamper made of stainless steel 18. Handle in black.Technical data:
Flat basis of the tamper
Ergonomic handle made of wood
Height: 100 mm
Weight: 350 g
Motta Tamper Red - 57 mm
Manufacturer: MOTTA
Tamper made of stainless steel 18.
Handle in red.Technical data:
Flat basis of the tamper
Ergonomic handle made of wood
Height: 100 mm
Weight: 350 g
Barista Space - C2 Coffee Tamper Gold 58mm
Manufacturer: BARISTA SPACE
Tamper made by Barista Space. With its unique height adjusting system, you can get an even, repeatable shot of espresso every time. Improving espresso's quality and barista's performance, it is a perfect tool for every cafe.SettingThe tamper allows you to set the distance between the tamping base and the handle, depending on the dose of coffee you use. The side of the base is laser-marked. In order to change the setting, loosen the screw with the adjustment key, set as preferred, and lock the screw.How it's builtThe diameter of the base is 58mm. It is made from stainless steel and aluminum, it is adjustable. It also has anti-slip design on the knob.
Barista Space - Tamper Keychain
Manufacturer: BARISTA SPACE
The Barista Space coffee tamper keychain, with an additional charm featuring the brand's logo. It makes for a great keychain, gadget or gift idea for coffee lovers.
Motta - Tamper Nonstick Black 58mm
Manufacturer: MOTTA
Tamper made of stainless steel 18, with nonstick coating. Handle made of wood.
Technical data:
Flat base of the tamper
Ergonomic handle made of wood
Height: 100 mm
Motta Tamper brown - 54 mm
Manufacturer: MOTTA
Tamper made of stainless steel 18.
Handle in brown.Technical data:
Diameter 54 mm
Flat basis of the tamper
Ergonomic handle made of wood
Height: 100 mm
Weight: 350 g
Motta - Grinder Funnel 60mm
Manufacturer: MOTTA
Motta Grinder Funnel helps to dose coffee grounds directly into the portafilter. Avoid the mess and don't waste your coffee!
60mm height, compatible with filter holders up to 58mm (E61).
Made in Italy.
Motta - Pressino Black Tamper - 51 mm
Manufacturer: MOTTA
Motta stainless steel tamper with wooden handle.
Base diameter: 51mm
Made in Italy.
Motta Tamper brown - 52 mm
Manufacturer: MOTTA
Tamper made of stainless steel 18.
Handle in brown.Technical data:
Diameter 52 mm
Flat basis of the tamper
Ergonomic handle made of wood
Height: 100 mm
Weight: 350 g
Espresso Gear - Rosewood Tamper Flat 58mm
Manufacturer: ESPRESSO GEAR
Classic, professional tamper from Espresso Gear. A good tamper is one of the key elements to achieve a perfect espress - well-tamped coffee improves the water flow and adds consistency. Made of high-quality stainless steel and rosewood. This model has got a flat, 40% heavier base than a traditional one.
Well-fitted, perfectly balanced, weighing 250 grams, with hollowed base - all that makes it a peerfect tool for professional use. Comes with a bag.
Diameter: 58 mm.
Eureka - Adjustable Tamper 58mm Walnut
Manufacturer: EUREKA
A perfect tamping experience to any type of palm and hand size.
Features:
- FIT EVERY BARISTA'S HAND: Designed to be user-adjustable and thus offer a perfect tamping experience to any type of palm and hand size.
- EXTREMELY EASY TO REGULATE: In 4 different heights, thanks to the detachable rings.
- ANTI-CHANNELING AID: Supporting the barista tamping technique, thanks to the solidity given by its considerable weight more than half kilo.
- PREMIUM QUALITY AND FINISH : Stainless steel base generated by precision mechanical processing to ensure premium aesthetics and dimensional quality as well as a reliable long-lasting product.
- MATERIALS & DIMENSIONS: Metal and rubber tamping base, walnut handle.
Motta Tamper Competition Black - 58.4 mm
Manufacturer: MOTTA
Tamper made of stainless steel 18.
Handle in black.Technical data:
Flat basis of the tamper
Ergonomic handle made of wood
Height: 100 mm
Weight: 350 g
Last Chance
Motta - Wooden Tamper Base with Stripes
Manufacturer: MOTTA
A stylish wooden tamper base. Compatible with any size Motta tampers.
Made in Italy.
Motta Tamper Black - 49 mm
Manufacturer: MOTTA
Tamper made of stainless steel 18.
Handle in black.Technical data:
Diameter 49 mm
Flat basis of the tamper
Ergonomic handle made of wood
Height: 100 mm
Weight: 350 g
Motta Tamper Carbon Look - 58 mm
Manufacturer: MOTTA
Tamper made of stainless steel 18. Handle decorated with a carbon look pattern.
Technical data:
Flat basis of the tamper
Ergonomic handle made of wood
Height: 100 mm
Weight: 365 g