FREE DELIVERY FROM €99
Fast delivery
365 days return policy

Jak wyczyścić kubek termiczny i butelkę termiczną? Podpowiadamy jak usunąć osad z herbaty i kawy

Przychodzi taki moment w życiu każdego kawosza czy kawoszki, gdy trzeba zrewidować stan posiadanych dóbr kawowych i ocenić jego zużycie. Niestety w przypadku naczyń termicznych sezon zimowy odciska na nich piętno zabrudzeń – wszak kawa barwi i pozostawia osad, a ten ze stali nierdzewnej nie tak łatwo usunąć. Niemniej, nie jest to niemożliwe… Jak więc wyczyścić kubek termiczny?

Jak wyczyścić kubek termiczny z osadu po kawie? A jak wyczyścić kubek z osadu herbaty?

Kawa jako napój silnie barwiący, obok herbaty czy wina, wpływa na stan naszego uzębienia jak i dowolnego naczynia, z którego czarny trunek spożywamy. Osad kawowy i herbaciany jest osadem natury mineralnej, co oznacza, że dobrze będą na niego działały specyfiki bazujące na pochodnych kwasku cytrynowego. Soda oczyszczona natomiast poradzi sobie z osadami odzwierzęcymi – np. brudnymi naczyniami w zmywarce, więc jest dobrym substytutem, gdy w mieszkaniu zabraknie tabletek do zmywarki. Soda doskonale także dezynfekuje różne powierzchnie – może stanowić końcowy element całej procedury czyszczenia metalowych naczyń.

KINTO - TRAVEL Tumbler Khaki 500ml

Manufacturer: KINTO

500 ml KINTO TRAVEL insulated tumbler. The mug is leakproof, durable and keeps the temperature of the drink for a long time. It works well with both hot and cold drinks, so you can enjoy coffee, tea or water at the right temperature on a walk, while travelling or on the way to work. KINTO TRAVEL's double stainless steel walls with a vacuum between prevent heat transfer. The foil layer covering the inner wall reflects heat back inside, also contributing to excellent heat and cold retention. Keeps drinks cold under 8℃, and hot above 65℃ for 6 hours. In addition to usability, material and texture support long-term use. Made of durable 18-8 stainless steel, the tumbler does not rust easily. The colored tumblers have a powder coat finish on the surface which prevents scratches. Moreover, the smooth electro-polished interior prevents odors and stains, letting you maintain it clean and fresh. The cap feels smooth on the mouth as there are no screws, and is structurally designed to stop ice cubes and hot drinks from coming out vigorously so you can drink comfortably until the very last sip. The cap is leakproof, so you don't have to worry about spilling the drink. The cap with a seal are made of food-safe polypropylene and silicone. Dimensions (mm): 74 (diameter) x 197 (height with cap); 173 (height without cap).
KINTO - DAY OFF Tumbler Gray 500ml

Manufacturer: KINTO

500 ml KINTO DAY OFF insulated tumbler. The mug is leakproof, durable and keeps the temperature of the drink for a long time. It works well with both hot and cold drinks, so you can enjoy coffee, tea or water at the right temperature on a walk, while travelling or on the way to work. KINTO DAY OFF's double stainless steel walls with a vacuum between prevent heat transfer. The foil layer covering the inner wall reflects heat back inside, also contributing to excellent heat and cold retention. Keeps drinks cold under 8℃, and hot above 65℃ for 6 hours. In addition to usability, material and texture support long-term use. Made of durable 18-8 stainless steel, the tumbler does not rust easily. The colored tumblers have a powder coat finish on the surface which prevents scratches. Moreover, the smooth electro-polished interior prevents odors and stains, letting you maintain it clean and fresh. The cap feels smooth on the mouth as there are no screws, and is structurally designed to stop ice cubes and hot drinks from coming out vigorously so you can drink comfortably until the very last sip. The cap is leakproof, so you don't have to worry about spilling the drink. The cap with a seal are made of food-safe polypropylene and silicone. With a rounded handle that is comfortable to hold, it is perfect for carrying around on walks or day trips. Dimensions (mm): 74 (diameter) x 197 (height with cap); 173 (height without cap).
KINTO - TRAIL TUMBLER Sand Beige 580ml

Manufacturer: KINTO

580 ml KINTO TRAIL TUMBLER insulated tumbler. The tumbler is leakproof, durable and keeps the temperature of the drink for a long time. It works well with both hot and cold drinks, so you can enjoy coffee, tea or water at the right temperature on a walk, while travelling or on the way to work. KINTO TRAIL TUMBLER's double stainless steel walls with a vacuum between prevent heat transfer.  In addition to usability, material and texture support long-term use. Made of durable 18-8 stainless steel, the tumbler does not rust easily. The colored tumblers have a powder coat finish on the surface which prevents scratches. The tumbler mouth is designed without screws and protrusions so you can drink comfortably. Mouth opening diameter is 42mm. The cap is leakproof, so you don't have to worry about spilling the drink. The cap with a seal are made of food-safe polypropylene and silicone. With a rounded handle that is comfortable to hold, it is perfect for carrying around on walks or day trips. Dimensions (mm): 74 (diameter) x 240 (height with cap); 202 (height without cap).
KINTO - TRAIL TUMBLER White 580ml

Manufacturer: KINTO

580 ml KINTO TRAIL TUMBLER insulated tumbler. The tumbler is leakproof, durable and keeps the temperature of the drink for a long time. It works well with both hot and cold drinks, so you can enjoy coffee, tea or water at the right temperature on a walk, while travelling or on the way to work. KINTO TRAIL TUMBLER's double stainless steel walls with a vacuum between prevent heat transfer.  In addition to usability, material and texture support long-term use. Made of durable 18-8 stainless steel, the tumbler does not rust easily. The colored tumblers have a powder coat finish on the surface which prevents scratches. The tumbler mouth is designed without screws and protrusions so you can drink comfortably. Mouth opening diameter is 42mm. The cap is leakproof, so you don't have to worry about spilling the drink. The cap with a seal are made of food-safe polypropylene and silicone. With a rounded handle that is comfortable to hold, it is perfect for carrying around on walks or day trips. Dimensions (mm): 74 (diameter) x 240 (height with cap); 202 (height without cap).
KINTO - TRAVEL Tumbler White 500ml

Manufacturer: KINTO

500 ml KINTO TRAVEL insulated tumbler. The mug is leakproof, durable and keeps the temperature of the drink for a long time. It works well with both hot and cold drinks, so you can enjoy coffee, tea or water at the right temperature on a walk, while travelling or on the way to work. KINTO TRAVEL's double stainless steel walls with a vacuum between prevent heat transfer. The foil layer covering the inner wall reflects heat back inside, also contributing to excellent heat and cold retention. Keeps drinks cold under 8℃, and hot above 65℃ for 6 hours. In addition to usability, material and texture support long-term use. Made of durable 18-8 stainless steel, the tumbler does not rust easily. The colored tumblers have a powder coat finish on the surface which prevents scratches. Moreover, the smooth electro-polished interior prevents odors and stains, letting you maintain it clean and fresh. The cap feels smooth on the mouth as there are no screws, and is structurally designed to stop ice cubes and hot drinks from coming out vigorously so you can drink comfortably until the very last sip. The cap is leakproof, so you don't have to worry about spilling the drink. The cap with a seal are made of food-safe polypropylene and silicone. Dimensions (mm): 74 (diameter) x 197 (height with cap); 173 (height without cap).
New
Asobu - Mini Pick Me Up Pastel Blue - 360 ml Travel Mug

Manufacturer: ASOBU

Asobu Pick Me Up is a thermal mug with a capacity of 360 ml. The mug is leak-proof, durable, has a ceramic, non-absorbent inner coating, and keeps the temperature of the beverage for a long time.  Key features:- Ceramic inner coating prevents the cup from absorbing the aroma and taste of the beverage.- Made of high-quality food-safe steel and plastics, BPA-free.- Double steel walls with copper insulation keep the temperature of the brew for hours.- Convenient spout and secure closure.- Hand wash recommended.- Silicone, non-slip base.- Fits standard cup holders.
Hario - Thermal Mug White 470ml

Manufacturer: HARIO

470 ml Hario thermal mug. This unique mug has double steel walls, an internal ceramic coating, and excellent aesthetics. The mug is made of stainless steel and plastic. Cold coffee is a thing of the past - the double walls ensure that your prepared brew stays hot for a long time. The interior of the mug is coated with ceramic. You can enjoy the delicious taste of freshly brewed coffee for an extended period without any metallic odor. Additionally, thanks to the ceramic coating, the interior does not stain easily and does not absorb the smell of the brew. The lid is made of plastic and helps retain temperature longer, but it does not fully protect the drink from spilling. The closure may not be entirely leak-proof, for example, if tossed into a bag - the brand aimed to create a product that replaces a daily-use mug, allowing you to enjoy hot coffee or tea for longer. The mug is compatible with Hario V60 drippers - you can brew coffee directly into it. The mug is not suitable for use in microwaves and dishwashers.
Fellow - Carter Cold Tumbler - Mint Chip - Insulated Mug 591ml

Manufacturer: FELLOW

Carter Cold Tumbler is an extraordinary insulated mug from Fellow. It is functional, delights the user with its design and fits most cup holders. Perfect choice for someone who has high demands towards the product. This mug has a special Cold Lid with a straw, which is perfect especially for iced drinks in the summer. But hey - you can drink from it whenever you want! The straw is made of durable Tritan and does not fall out of the tumbler. Inside, it has a special ceramic coating that does not affect the taste of the drink. This mug is not leakproof. The lid prevents accidental splashing of the drink, but does not protect against spilling it.   The most important features: - Capacity: 591 ml. - Keeps drinks cold for 18 hours. - Material: stainless steel, ceramics, plastic, Tritan. - 100% BPA free. - Fits V60 Drippers (62mm diameter), not compatible with the AeroPress. - Fits most cup holders. - Height: 29.5 cm, diameter: 7.7 cm. - The cap can be washed in the dishwasher (hand-washing recommended), the cup only by hand.
Fellow - Carter Carry Tumbler - Matte White - Insulated Mug 946ml

Manufacturer: FELLOW

Carter Carry Tumbler is an extraordinary insulated mug from Fellow. It is functional and delights the user with its design. Perfect choice for someone who has high demands towards the product. It is made for people who are always in the journey. The cup fits most cup holders and it is equipped with anti-splash guard.The Carry Lid is leakproof and equipped with a premium stainless steel handle built for durability and comfort. This mug was designed this way for you to enjoy the full aroma of your brew. Its thin lip was adjusted to mimic a Cabernet glass. It has a special ceramic coating, thanks to which the taste of the brew does not change.The most important features:- Capacity: 946 ml.- Material: stainless steel, ceramics.- It keeps hot temperatures for 12 hours and cold for 24.- 100% BPA free.- Leakproof.- Equipped with a special anti-splash guard.- Fits all standard drippers (diameter 61 mm), does not fit the AeroPress Coffee Maker.- Fits most cup holders.- Hand-wash only. Not dishwasher safe.
Fellow - Carter Cold Tumbler - Peri Twinkle - Insulated Mug 473ml

Manufacturer: FELLOW

Carter Cold Tumbler is an extraordinary insulated mug from Fellow. It is functional, delights the user with its design and fits most cup holders. Perfect choice for someone who has high demands towards the product. This mug has a special Cold Lid with a straw, which is perfect especially for iced drinks in the summer. But hey - you can drink from it whenever you want! The straw is made of durable Tritan and does not fall out of the tumbler. Inside, it has a special ceramic coating that does not affect the taste of the drink. This mug is not leak proof. The lid prevents accidental splashing of the drink, but does not protect against spilling it.   The most important features: - Capacity: 473 ml. - Keeps drinks cold for 18 hours. - Material: stainless steel, ceramics, plastic, Tritan. - 100% BPA free. - Fits V60 Drippers (62mm diameter), not compatible with the AeroPress. - Fits most cup holders. - Height: 26.8 cm, diameter: 7.7 cm. - The cap can be washed in the dishwasher (hand-washing recommended), the cup only by hand.

Warto wspomnieć, że niewłaściwe, bądź całkowite zaniechanie czyszczenia kubka czy butelki termicznej, poza oczywistym wpływem na smak, może odcisnąć piętno na szczelności konstrukcji i długości czasu utrzymywania ciepła (bądź chłodu) wewnątrz naczynia. Czy kubek termiczny można myć w zmywarce? Większość producentów odradza mycie swoich produktów w zmywarkach. Silne strumienie wody pod ciśnieniem mogą porysować zewnętrzną powłokę kubka a nawet uszkodzić izolację termiczną. Zatem jak czyścić kubek termiczny? Lepiej będzie wybrać bezpieczniejszą dla naszego termonu opcję — mycie ręczne.

Metal i powłoka ceramiczna kubka termicznego: jak to wyczyścić? Instrukcja krok po kroku

W zależności od materiału wewnątrz termicznego naczynia można przydzielić nasz kubek/butelkę do jednej z dwóch kategorii: z wnętrzem metalowym (najczęściej będzie to stal nierdzewna) bądź wyściełanego powłoką ceramiczną (coraz śmielej wykorzystywanej w nowych produktach). Wnętrza metalowe łatwo absorbują zapachy poza samym brązowym osadem. Dobrze jest więc skorzystać ze środków usuwających olejki kawowe, tj. Urnex Clearly Coffee, który usunie drobne zanieczyszczenia i pozbędzie się nieprzyjemnego zapachu ze stalowego wnętrza.

A jak wyczyścić termos, gdy mamy do czynienia z większymi zabrudzeniami? W takiej sytuacji można wytoczyć działo z „domowego” kwasku cytrynowego:

  1. Zawartość jednej saszetki kwasku (ok. 20g), wsypujemy go do butelki bądź kubka.
  2. Zalewamy wrzątkiem i zostawiamy na parę godzin aby „zaczął działać”.
  3. Następnie całość dokładnie płuczemy i myjemy w zwykły sposób korzystając z gąbki i płynu do mycia naczyń.

Możemy użyć też specjalistycznego produktu czyszczącego – Urnex Cafiza 2. W przypadku Cafiz’y działamy podobnie jak z kwaskiem, tylko wystarczy nam do tego jedna czubata łyżeczka tego specyfiku.

W przypadku wnętrz powleczonych ceramiką najczęściej zapach nie jest problemem, gdyż go nie absorbują. Pozostaje jednak kwestia osadu po kawie czy herbacie w termosie. Najczęściej dotyczy to jasnej powłoki – co wizualnie jest mało estetyczne. Tutaj poradzi sobie wcześniej wspominany Urnex Clearly Coffee:

  1. Urnex Clearly Coffee należy wlać do środka rozcieńczając nieco wodą. Taką mieszankę zostawiamy na noc.
  2. Rano wylewamy płyn.
  3. Myjemy standardowo całość za pomocą gąbki z płynem do mycia naczyń.

Jak wyczyścić kubek termiczny sodą oczyszczoną? Usuwa ona różne osady, w tym tłuszcze. Jeśli przechowywaliśmy w naczyniu np. kawę z mlekiem, bądź po prostu chcemy naczynie porządne zdezynfekować to warto skorzystać z tego zasadowego proszku. Jak wyczyścić w ten sposób termos? 

Wsypujemy do środka połowę standardowej torebki tego specyfiku (40g) i zalewamy wrzątkiem.

Całość mieszamy i zostawiamy na kilkanaście minut.

Po tym czasie płuczemy i wykonujemy standardowe mycie całego termosu/butelki.

Co z plastikiem? Co z wieczkiem? Jak wyczyścić nakrętkę od kubka termicznego?

Wnętrze przenośnych schowków na kawę to nie jedyny element, który należy wziąć pod uwagę przy czyszczeniu. Warto również pamiętać o wieczku, nakrętce – zawiera ona dużo zagłębień, szczelin i rowków, w których z łatwością mogą gromadzić się osady. Jak wyczyścić nakrętkę kubka termicznego? Tutaj z pomocą przyjdą szczotki, szczoteczki, gąbki i gąbeczki. Wszystko to co pomoże wyczyścić możliwie dobrze każdą szczelinę. Niezaprzeczalnym ułatwieniem będzie wcześniejsze rozebranie pokrywki na możliwe drobne elementy – uszczelki można wyjąć, poszczególne elementy daje się czasem rozkręcić bądź rozłożyć. Wspomniane uszczelki, gdy producent przewidział taką możliwość, można co jakiś czas wymienić – zwiększy to szczelność termicznego naczynia oraz wydłuży utrzymanie temperatury napoju znajdującego się wewnątrz. Jakim specyfikiem czyścić wieczka i nakrętki od kubka termicznego? Tak samo jak w przypadku głównej części warto skorzystać z tego, czego potrzebujemy, w zależności od rodzaju zabrudzenia.

  • Brzydkie osady z kawy usuniemy poprzez kąpiel w roztworze kwasku cytrynowego – 40g kwasku na 500ml bardzo ciepłej wody.
  • Osady pozostałe w szczelinach po mleku przepędzi soda oczyszczona – tutaj również sprawdzi się doza 40g sody na 500ml bardzo ciepłej wody (chodzi o wodę możliwe gorącą, ale nie wrzącą aby nie uszkodzić plastikowych elementów).

Niektóre wieczka i nakrętki można myć w zmywarce, wtedy sprawa ich czyszczenia wydaje się być sporo ułatwiona. Warto mimo wszystko raz na jakiś czas poświęcić im czas i uwagę na ręczne, dokładniejsze czyszczenie. Czyż wiosna nie jest na to idealną porą?

New
MiiR - Sipper Straw Bottle Black 470ml

Manufacturer: MIIR

MiiR Sipper Straw Bottle is a stainless steel thermal bottle with a straw, featuring double walls and a capacity of 470 ml. It is durable, elegant, and keeps your drink at the desired temperature for a long time. Ideal for daily use with cold beverages – at home, at work, in the car, and on the go.  The Sipper Straw Bottle combines a twist-on threaded lid and flexible silicone straw with our trusted Wide Mouth Bottle, making spills a hassle of the past. It also checks the boxes for insulation and cup holder compatibility so you’ll never be far from refreshing, smooth sipping.Features:Thermo 3D | Double-wall vacuum insulation keeps liquid cold.18/8 stainless steel | Enduring material meets beautiful design.Sipper Straw Lid | Spill-resistant threaded design with flexible silicone straw. Not intended for use with hot beverages.Cup holder compatible | Designed for on-the-go sipping.Hardshell™ powder coat | Safe and durable finish for long-lasting use.
New
MiiR - Sipper Straw Bottle Sandstone White 470ml

Manufacturer: MIIR

MiiR Sipper Straw Bottle is a stainless steel thermal bottle with a straw, featuring double walls and a capacity of 470 ml. It is durable, elegant, and keeps your drink at the desired temperature for a long time. Ideal for daily use with cold beverages – at home, at work, in the car, and on the go.  The Sipper Straw Bottle combines a twist-on threaded lid and flexible silicone straw with our trusted Wide Mouth Bottle, making spills a hassle of the past. It also checks the boxes for insulation and cup holder compatibility so you’ll never be far from refreshing, smooth sipping.Features:Thermo 3D | Double-wall vacuum insulation keeps liquid cold.18/8 stainless steel | Enduring material meets beautiful design.Sipper Straw Lid | Spill-resistant threaded design with flexible silicone straw. Not intended for use with hot beverages.Cup holder compatible | Designed for on-the-go sipping.Hardshell™ powder coat | Safe and durable finish for long-lasting use.
MiiR - Wide Mouth Bottle Black 470 ml

Manufacturer: MIIR

MiiR Wide Mouth Bottle is a double-wall bottle made of stainless steel with 470 ml capacity. Leakproof, sturdy, yet elegant, with a large capacity. Perfect for everyday use whenever you need hydration - at home, when travelling or for sports activities. Wide opening makes it easy to clean and ice compatible.Features:- Thermo 3D™ Double wall vacuum insulation technology keeps the temperature of the beverage - hot or cold.- The walls are made of 18/8 medical grade stainless steel. The outer wall is Hardshell™ Powder coated. The material does not transfer flavour and does not add metal aftertaste.- The screw-on lid is made of BPA free plastic with a seal. The tumbler is leakproof and the handle on the lid makes the bottle easy to carry.- Wide opening makes it easy to clean and ice compatible.- Compatible with cup holders.- Each product is marked with a code on the bottom. You can register the code on the website and track the environmental project you supported with your purchase!
MiiR - Climate+ Wide Mouth Bottle Black 590ml

Manufacturer: MIIR

Climate+ by MiiR is in a class of its own, boasting 25% less stainless steel, no new plastic, and 110% of its carbon footprint offset. MiiR Wide Mouth Bottle is a double-walled bottle made of stainless steel with 590 ml capacity. Leakproof, sturdy, yet elegant, with a large capacity. Perfect for everyday use whenever you need hydration - at home, when travelling or for sport activities. Wide opening makes it easy to clean and ice compatible.Features:- Thermo 3D™ Double wall vacuum insulation technology keeps the temperature of the beverage - hot or cold.- The walls are made of 18/8 stainless steel. The outer wall is Hardshell™ Powder coated. The material does not transfer flavour and does not add metal aftertaste.- The screw-on lid is made of BPA free plastic with a seal. The tumbler is leakproof and the handle on the lid makes the bottle easy to carry.- Wide opening makes it easy to clean and ice compatible.- Compatible with cup holders.- Each product is marked with a code on the bottom. You can register the code on the website and track the environmental project you supported with your purchase!
MiiR - Wide Mouth Bottle Basal 950 ml

Manufacturer: MIIR

MiiR Wide Mouth Bottle is a double-wall bottle made of stainless steel with 950 ml capacity. Leakproof, sturdy, yet elegant, with a large capacity. Perfect for everyday use whenever you need hydration - at home, when travelling or for sport activities. Wide opening makes it easy to clean and ice compatible. Features: - Thermo 3D™ Double wall vacuum insulation technology keeps the temperature of the beverage - hot or cold. - The walls are made of 18/8 medical grade stainless steel. The outer wall is Hardshell™ Powder coated. The material does not transfer flavour and does not add metal aftertaste. - The screw-on lid is made of BPA free plastic with a seal. The tumbler is leakproof and the handle on the lid makes the bottle easy to carry. - Wide opening makes it easy to clean and ice compatible. - Compatible with cup holders. - Each product is marked with a code on the bottom. You can register the code on the website and track the environmental project you supported with your purchase!
MiiR - 360 Traveler Insulated Bottle Black 1l

Manufacturer: MIIR

MiiR Tomo is a modern vacuum insulated bottle made of stainless steel, with double walls and 1 litre capacity. Leakproof, sturdy, yet elegant, equipped with two cups and keeps temperature of the beverage for a lng time. Its Leakproof 360 Lid couldn’t be easier to use: press the center button, sip from any side, then press again to seal. Perfect for everyday use on the go and for travellers. Features: - Two 230ml twist-off double-wall insulated sipping mugs for life’s shared adventures. - The 360 lid is leakproof and couldn’t be easier to use: press the center button, sip or pour from any side, then press again to seal. It is made of BPA free plastic with a seal. - Thermo 3D™ Double wall vacuum insulation technology keeps the temperature of the beverage - hot or cold. - The walls are made of 18/8 medical-grade stainless steel. The outer wall is Hardshell™ Powder coated. The material does not transfer flavour and does not add metal aftertaste. - Convenient handle for carrying. - Hand wash recommended, however, the lid is top-rack dishwasher safe. - Each product is marked with a code on the bottom. You can register the code on the website and track the environmental project you supported with your purchase! - Packed in a cardboard box.
New
MiiR - Sipper Straw Bottle Thousand Hills 470ml

Manufacturer: MIIR

MiiR Sipper Straw Bottle is a stainless steel thermal bottle with a straw, featuring double walls and a capacity of 470 ml. It is durable, elegant, and keeps your drink at the desired temperature for a long time. Ideal for daily use with cold beverages – at home, at work, in the car, and on the go.  The Sipper Straw Bottle combines a twist-on threaded lid and flexible silicone straw with our trusted Wide Mouth Bottle, making spills a hassle of the past. It also checks the boxes for insulation and cup holder compatibility so you’ll never be far from refreshing, smooth sipping.Features:Thermo 3D | Double-wall vacuum insulation keeps liquid cold.18/8 stainless steel | Enduring material meets beautiful design.Sipper Straw Lid | Spill-resistant threaded design with flexible silicone straw. Not intended for use with hot beverages.Cup holder compatible | Designed for on-the-go sipping.Hardshell™ powder coat | Safe and durable finish for long-lasting use.
New
MiiR - Sipper Straw Bottle Tidal Blue 470ml

Manufacturer: MIIR

MiiR Sipper Straw Bottle is a stainless steel thermal bottle with a straw, featuring double walls and a capacity of 470 ml. It is durable, elegant, and keeps your drink at the desired temperature for a long time. Ideal for daily use with cold beverages – at home, at work, in the car, and on the go.  The Sipper Straw Bottle combines a twist-on threaded lid and flexible silicone straw with our trusted Wide Mouth Bottle, making spills a hassle of the past. It also checks the boxes for insulation and cup holder compatibility so you’ll never be far from refreshing, smooth sipping.Features:Thermo 3D | Double-wall vacuum insulation keeps liquid cold.18/8 stainless steel | Enduring material meets beautiful design.Sipper Straw Lid | Spill-resistant threaded design with flexible silicone straw. Not intended for use with hot beverages.Cup holder compatible | Designed for on-the-go sipping.Hardshell™ powder coat | Safe and durable finish for long-lasting use.
MiiR - Narrow Mouth Bottle White 680 ml

Manufacturer: MIIR

MiiR Narrow Mouth Bottle is a double-wall bottle made of stainless steel with 680 ml capacity. Leakproof, sturdy, yet elegant, with a large capacity. Perfect for everyday use whenever you need hydration - at home, when travelling or for sport activities. Features: - Thermo 3D™ Double wall vacuum insulation technology keeps the temperature of the beverage - hot or cold. - The walls are made of 18/8 medical grade stainless steel. The outer wall is Hardshell™ Powder coated. The material does not transfer flavour and does not add metal aftertaste. - The screw-on lid is made of BPA free plastic with a seal. The tumbler is leakproof and the handle on the lid makes the bottle easy to carry. - Compatible with cup holders. - Each product is marked with a code on the bottom. You can register the code on the website and track the environmental project you supported with your purchase!
MiiR - Wide Mouth Bottle Basal 590 ml

Manufacturer: MIIR

MiiR Wide Mouth Bottle is a double-wall bottle made of stainless steel with 590 ml capacity. Leakproof, sturdy, yet elegant, with a large capacity. Perfect for everyday use whenever you need hydration - at home, when travelling or for sport activities. Wide opening makes it easy to clean and ice compatible. Features: - Thermo 3D™ Double wall vacuum insulation technology keeps the temperature of the beverage - hot or cold. - The walls are made of 18/8 medical grade stainless steel. The outer wall is Hardshell™ Powder coated. The material does not transfer flavour and does not add metal aftertaste. - The screw-on lid is made of BPA free plastic with a seal. The tumbler is leakproof and the handle on the lid makes the bottle easy to carry. - Wide opening makes it easy to clean and ice compatible. - Compatible with cup holders. - Each product is marked with a code on the bottom. You can register the code on the website and track the environmental project you supported with your purchase!

Lepiej czyścić niż… szorować

Ważne, aby na bieżąco dbać o nasz termos bądź butelkę. Należy pamiętać, aby w środku nie pozostawiać zawartości na wiele dni, zwłaszcza jeśli jest to kawa z dodatkiem mleka. Po każdorazowym użyciu warto podjąć się dokładnego mycia wraz z wyciągnięciem i umyciem uszczelek – przedłuży to ich żywotność oraz zapobiegnie osadzaniu się resztek wewnątrz wąskich szczelin i zakamarków. Jeśli pozostałości zagnieździły się w wąskim dnie butelki termicznej pomocny może okazać się wycior, który zmieści się w wąskiej szyjce i dotrze na samo dno czyszcząc je z pozostałości po naszym ostatnim, smacznym lecz równocześnie brudzącym napoju. Wszystkie elementy po myciu, do którego użyć można zwykłego płynu do mycia naczyń, suszymy, skręcamy i chowamy w suchym miejscu, gdzie w sposób bezpieczny i higieniczny oczekiwać będą na przyjęcie kolejnej porcji małego co nieco. Jak wyczyścić kubek termiczny? Warto pamiętać, że butelek i termosów nie można myć w zmywarce – wyjątek stanowią niektóre plastikowe przykrywki, wtedy taką informację znajdziemy w dołączonej do produktu instrukcji obsługi. Jednak łatwiej przyjąć, gdy mamy co do tego jakieś wątpliwości, że danej butelki, kubka czy termosu nie należy myć w zmywarce.

Podsumowując

Jak czyścić kubek termiczny z osadów po kawie i herbacie? Ano skutecznie i bezpiecznie zarazem.

  • Warto pamiętać o kilku zasadach, dobrać odpowiedni środek czyszczący z szerokiego wachlarza możliwości i… zabrać się do czyszczenia. To nic trudnego a efekt pozbawienia naczynia niechlujnego wnętrza będzie wyczuwalny (a raczej NIE wyczuwalny) i zauważalny „gołym okiem”.
  • Kubki i termosy myj ręcznie.
  • Poświęć wiosenny czas na porządki w kawowym ekwipunku – gwarantujemy, że nie będzie to chybiony pomysł.
  • Kubek termiczny odwdzięczy się sprawnym działaniem bez nieprzyjemnego posmaku.


Zobacz również